GenStart Advanced Generator Controller

GenStart Control
Buy Factory Direct: $599

After you place your order, please download our specifications form, save the document, and e-mail it to hawk@flightsystems.com.

Product Summary

The GenStart standby controller is an affordable but reliable option to replace obsolete controls, newer generation controls, or just to add additional functionality such as remote access and remote notifications. The GenStart controller is NFPA 110 compliant, compact, affordable, user programmable and will replace a broad range of existing controls.

User profiles are available for some applications and more are being developed. Custom programming may be available for your application.

Digital / Analog / Power Inputs

  • 8 Channel Digital Input
  • Switched to ground
  • Settings:
  • Active Open
  • Active Closed
  • Options:
  • 0-Disabled
  • 1-Air Damper
  • 2-Charger Failure
  • 3-High Engine Temp
  • 4-Low Engine Temp
  • 5-Low Fuel Pressure
  • 6-Low Fuel Level
  • 7-Low Oil Level
  • 8-Low Oil Pressure
  • 9-Low Coolant
  • 10-Emergency Stop
  • 11-Basin Rupture
  • 12-Fuel Leak
  • 13-Remote Start
  • 4 Channel Analog Input
  • With constant current driver for
    resistive sensors (0-2500 ohms)
  • Settings:
  • Current (2-20mA)
  • Offset
  • Span
  • Low Alarm
  • Pre Low Alarm
  • Pre High Alarm
  • High Alarm
  • Options:
  • 0-Disabled
  • 1-Oil Temp
  • 2-Oil Pressure
  • 3-Coolant Temp
  • 4-Coolant Level
  • 5-Fuel Pressure
  • 6-Fuel Level
  • 7-User Input 1
  • 8-User Input 2
  • 3 Phase Voltage and Current Input
  • Settings:
  • CT Ratio
  • Over Current
  • Low Voltage
  • High Voltage
  • Low Frequency
  • High Frequency
  • Options:
  • Single Phase A-N
  • Single Phase A-B
  • 3 Phase (4 wire)
  • Real Time Clock
  • With programmable self exercise
  • Settings:
  • Date and Time
  • Exercise Interval
  • Exercise Time
  • 4 Programmable NO Relays
  • Options:
  • 0-Disabled
  • 1-Start Solenoid
  • 2-Fuel Solenoid
  • 3-Pre Heat
  • 4-Field Flash
  • 5-Not In Auto
  • 6-System Ready
  • 7-Transfer Ready
  • 8-Shutdown
  • Power Input 7-36VDC
  • Settings:
  • Low Cranking voltage
  • Low Battery Voltage
  • High Battery Voltage
  • RPM Input 20-20khz
  • Settings:
  • Crank Disconnect RPM
  • Under Speed
  • Over Speed

Highlights

  • Backlit, daytime readable display
  • 8 Channel Digital Input
  • 4 Channel Analog Input
  • Single or Three Phase Use
  • NFPA 110 Level 1 Compliant
  • User Programmable
  • Remote monitoring (with additional GenStart Modem)
  • Upgradable Software
  • Easy to use PC software
  • Remote Display Available Upon Request
Flight Systems' manufactured products are made in the USA