Temperature Sensors | RPM Sensors | Pressure Sensors
Field proven to be tough, reliable, and accurate, these sensors can be relied on to provide repeatable results year after year while operating in the toughest Industrial environments. The temperature and RPM sensors are designed and produced by Flight Systems. The pressure sensor is modified and upgraded by Flight Systems.
Temperature Sensors
57-A277-02 All-weather Indoor-Outdoor Probe Temperature Sensor
It comes with a 13' sun (UV) resistant cable and supplied with a Mate-N-Lok® 2-pin connector and mating half ready mounting clip/shield ground. NTC, 8.5K ohms at +25ºC or NTC, 8.5K ohms at +77°C. The best part of this is its price – it can't be matched for the $25 it'll cost you!
Click graph to enlarge
57-CU66-76 Marine and Industrial Negative Temperature Co-efficient Temperature Sensor
This high precision temperature sensor features a solid brass housing with 14 NPT threads. Overall length is 2". Sensor is internally potted to provide long lasting protection from the elements. This temperature sensor uses a negative temperature co-efficient with a resistance of 30K ohms at 25°C. Resistance reached 500 ohms at 150°C. Tolerance is restricted to +/-0.2°C. Your cost is $48.
- Solid brass housing with 1 1/2" insertion length. Provides reliable and accurate thermal transfer.
- 1/2" 14 NPT threads to fit many common applications
- Negative thermal co-efficient resistance is 30K ohms at 25°C
- Long lasting and durable construction sealed from elements and chemicals
Click graph to enlarge
RPM Sensors
57-A995-03 High Output screw-in magnetic pickup/rpm sensor
Easily run several instruments simultaneously. This is a variable reluctance sensor with a built-in magnet in a threaded stainless steel case, supplied with nut, 2-pin connector and mating half, and 4 page Theory of Operation and Instructions booklet. Output .5VRMS @ .100" max clearance distance (.050" is typical clearance distance). These come in two lengths – 3" and 4". Thread size is 5/8-18UNF. This is the best of its type – and sells at $75 for the 3" and $85 for the 4".
Click diagram to enlarge
Pressure Sensors
Corrosion proofed, rugged 1 3/4" diameter variable resistance low pressure sensors
Available in 2 versions (0-30 PSI and 0-75 PSI), each with 1/4 NPT fitting and 2-spade terminal output isolated case. .5ohms to 200 ohms increasing resistance with increasing pressure – graph supplied. These start out life as a VDO commercial sensor. We rework each one adding internal bellows corrosion resistance, added relief to the pressure hole for better self-cleaning, and a corrosion resistant exterior finish. These we sell for $65.
Click graph to enlarge
Click graph to enlarge